Cat Pumps 15 Frame Plunger pump 1051
Material: Brass
Flow: 10 gpm / 38 lpm
Pressure: 100 – 2200 psi / 6.9 – 152 bar
Speed: 958 rpm
Inlet Pressure Range: -5 – 60 psi / -0.35 – 4.1 bar
Max. medium temp.: 160°F / 71°C
Read more..
Large own stock
Outstanding service
Fast delivery (1-2 days)
Thé Cat Pumps-dealer since 1978
Product description
Cat Pumps 1051
The Cat Pumps 1051 is a robust and efficient piston pump designed for demanding industrial applications. The stainless steel construction makes this pump highly resistant to corrosion and wear, even in tough working environments. With a flow rate of 38 litres per minute and a pressure range of up to 152 bar, the Cat Pumps 1051 offers a reliable solution for industries such as high-pressure cleaning, water treatment and chemical processing.
Cat Pumps 1051 Specifications
- Material: Stainless steel (SS)
- Flow rate: 38 litres per minute
- Pressure range: 6.9 to 152 bar
- Speed: 958 rpm
- Inlet pressure: -0.35 to 4.1 bar
- Maximum fluid temperature: 71°C
Cat Pumps 1051 Features
- Triplex piston design for efficient operation and minimal pulsation.
- Flushed inlet manifold (model 1051C) for additional cooling and lubrication for specific fluids.
- Flexible drive options, suitable for belt drive or direct coupling to a NEMA or IEC motor or hydraulic drive.
- Maintenance-friendly design with plug-in seal cases and interchangeable valve assemblies.
- Various sealing options: Standard with NBR seals, with alternatives for higher temperatures or chemical resistance.
Cat Pumps 1051 Seals
This pump is standard equipped with NBR seals and O-rings and is available in the following versions. The pump can be equipped with alternative seals, depending on the chemical composition of the pumped medium or the operating temperature.
| TYPE | DESCRIPTION | MAX. TEMP. | SUFFIX |
| NBR | Medium Nitrile (Buna-N) seals and O-Rings | 160°F (71°C) | - |
| FPM | Fluorocarbon (Viton®) seals and O-Rings, chemical resistance | 180°F (82°C) | .0110 |
| EPDM | Ethylene Propylene Diene Monomer seals and O-Rings | 160°F (71°C) | .0220 |
| HT | High-temperature high pressure seals | 180°F (88°C) | .3000 |
| STHT | High-temperature high pressure seals, special Teflon® low-pressure seals, NBR O-Rings | 190°F (88°C) | .3400 |
| High-temperature high pressure seals, special Teflon® low-pressure seals, FPM O-Rings | 190°F (88°C) | .3410 | |
| PTFE | Pure Polytetrafluoroethylene (Teflon®) Seals and Buna-N O-Rings | 190°F (88°C) | .0700 |
| Pure Polytetrafluoroethylene (Teflon®) Seals and FPM O-Rings | 200°F (93°C) | .0710 | |
| IPFE | I-Perfluoroelastomer (Teflon®) Seals and Isolast O-Rings | 200°F (93°C) | .0770 |
| ST4 | Special blend PTFE high and low pressure seals, Buna-N O-Rings | 190°F (88°C) | .4400 |
| Special blend PTFE high and low pressure seals, FPM O-Rings | 200°F (93°C) | .4410 | |
| NBRS | Buna-N silicone free seals and O-Rings | 160°F (71°C) | .6000 |
| FPM = Fluorocarbon, EPDM = Ethylene Propylene Diene Monomer, HT = High Temp (EPDM Alternative), STHT = Special PTFE High Temperature, PTFE = Pure Polytetrafluoroethylene, IPFE = I-Perfluoroelastomer, ST4 = Special PTFE 4, NBR = Medium Nitrile (Buna-N), NBRS = Buna-N silicon free seals and O-Rings. Viton® and Teflon® are registered trademarks of DuPont Dow Elastomers. | |||
Want to know more about the Cat Pumps 1051?
For questions or advice about the Cat Pumps 1051, contact Pijttersen. Our specialists will be happy to help you find the right pump for your application.
Documents
Cat Pumps Datasheet - Models 1051, 1051C, 1051D, 1057 - Pijttersen
Cat Pumps Service Manual - 5,7,15PFR Plunger Pumps - Pijttersen
Cat Pumps - Installation guidelines for high-pressure pumps - Pijttersen
Cat Pumps - Warnings and cautions for HP-pumps - Pijttersen
Related products
Specifications
Cat Pumps 15 Frame Plunger pump 1051
0 reviewsReview Cat Pumps Cat Pumps 15 Frame Plunger pump 1051
Material: Brass
Flow: 10 gpm / 38 lpm
Pressure: 100 – 2200 psi / 6.9 – 152 bar
Speed: 958 rpm..
Leave your details and we will contact you as soon as possible
